Fender RI Reverb Tweaks
This directory contains USENET articles Mic
has saved about guitars, equipment, pickup, techniques, players,
and so on. Mic has graciously granted permission to post the
stuff on the JT30 page on the off chance that it might be useful
in the context of Blues Harmonica. Mic is not responsible for
the content, just the collection.
Fender
Fender RI Reverb Tweaks
From tremolu--(at)--ol.com Sat Jul 27 15:11:07 CDT 1996
Article: 12530 of rec.audio.tubes
From: tremolu--(at)--ol.com (Tremolux)
Newsgroups: rec.audio.tubes
Subject: Re: Fender RI reverb tweaks?
Date: 27 Jul 1996 14:07:27 -0400
Organization: America Online, Inc. (1-800-827-6364)
Lines: 29
Sender: roo--(at)--ewsbf02.news.aol.com
Message-ID: <4tdlsv$s9--(at)--ewsbf02.news.aol.com>
References: <31FA459A.1D6--(at)--wis.com>
Reply-To: tremolu--(at)--ol.com (Tremolux)
NNTP-Posting-Host: newsbf02.mail.aol.com
>>>One thing that has me puzzled is that other than the 6V6, isn't
the reissue the identical circuit as the original ? If so, why
would you want to change component values and why would that
make the reverb sound more like an original ?
>>>(I admit that having had an original and a reissue, the reissue
does not sound nearly as good)
Simple Jack. The originals have close to 30 years use on them, so the
components have aged and their values shifted a bit. You seem to be an
avid tweaker and modifier, this seems like it would be right up your
alley. I spoke in depth with Terry Buddingh who wrote the article in GP
mag expalining his proposed tweak. He proposes changing the 250 pf
coupling cap to a 390 pf. This does improve the sound, since it lets more
reverb signal through, particularly at lower frequencies.
I have a reissue, and I have taken the process a bit further than Terry.
Instead of 390 pf, I used 470 pf, which gives an even bigger sound.
Additionally, I loaded down the reverb pan return by soldering a 47k
resistor directly across the socket where the return signal plugs in.
This further improved fidelity and "bigness" of sound. Lastly, I
incorporated a bit of Ampeg engineering. Refer to the schematic for an
old Reverberocket. Notice Ampeg put a low pass filter consisting of a 10k
resistor and a cap between the recovery tube's grid and cathode. Put that
in the Fender reissue and it gets rid of some of the brittleness the
reissues have. End result is a Fender reissue reverb that sounds
significantly better than stock, IMO.
Regards.
Index:
|