Mic Kaczmarczik's
5R4 not enough current Information
5R4 not enough current
Fender
5R4 not enough current
This directory contains USENET articles Mic
has saved about guitars, equipment, pickup, techniques, players,
and so on. Mic has graciously granted permission to post the
stuff on the JT30 page on the off chance that it might be useful
in the context of Blues Harmonica. Mic is not responsible for
the content, just the collection.
Fender
5R4 not enough current
From tremolu--(at)--ol.com Fri Jan 10 15:41:01 CST 1997
Article: 33869 of alt.guitar.amps
From: tremolu--(at)--ol.com (Tremolux)
Newsgroups: alt.guitar.amps
Subject: Re: 5R4 vs. 5AR4/GZ34
Date: 10 Jan 1997 06:39:10 GMT
Organization: AOL http://www.aol.com
Lines: 18
Message-ID: <19970110063700.BAA0502--(at)--adder01.news.aol.com>
References: <5b4bld$rj--(at)--senetp1.news.prodigy.com>
NNTP-Posting-Host: ladder01.news.aol.com
X-Admin: new--(at)--ol.com
>>>the 5R4 might not be so bad after all and can supply about 250 ma. at
600 volts dc ,
Like I said, there's nothing WRONG with the 5R4, it's just that it was
designed for much higher voltage applications, and lower current than a
5U4. Fender amps run in the mid 400s for Voltage, so there is no need for
the 5R4s higher voltage capability. At high current levels, the forward
conduction drop through a 5R4 would be high. Considerably higher than a
5AR4.
I never recommended trying to use a 5AR4 at the voltages you'd use a 5R4
at, it would be foolish to do so.
Regarding the 5R4's ratings, my Sylvania Tube Manual says with a capacitor
input filter, it's good for 150 ma. The 5U4 is rated at 275 ma.
Bottom line is that if you have a Fender, use a 5U4 or 5AR4, not a 5R4.