Date: Fri, 24 May 2002 18:41:59 -0400 From: The Bernadettes Subject: Re: Creative uses for tremolo circuit
"Molitor, Stephen" wrote:
> I have an amp with a tremelo that I never use. Any creative things I can do > with that knob, or circuit? Put in a tone control? Effects loop? > > Thanks. > > Steve Molitor > smolit~rac.com
It really depends on the circuit. On BF/SF Fenders I sometimes disable the vibrato and use the two knobs in addition with the reverb knob to make a three knob reverb effect like on the stand alone unit. Or I'll not have dwell but just a tone control (using the speed control) for the reverb then use the intensity knob as a variable feedback resistor which is very cool mod. You can also use the one of the vibrato knobs as a master volume. I'm also trying to figure out a way to disable the vibrato on a Vibro-Champ and use the tube and knobs to drive a small reverb pan, a Champ with reverb. There's a way to use an output transformer to drive a reverb tank, and use the disabled vibrato tube as a recovery gain stage. Still figuring this one out, the devil is in the details. Yeah, a lotta stuff like that can be done, you wanna make sure that the mod is reversable and you carefully detail how you did the mod so you can reverse it, and keep all the parts.